Netgenium ICP0200-IP Audio Only Illuminated Button Intercom Panel

NB: Images are indicative only

The ICP0200-IP is an IP device, powered from IEEE802.3af PoE and communicates over the network. Like all Netgenium devices, configuration is done by means of a web browser. The ICP0200-IP features a single, seven colour, illuminated Call Button. The colour of the Call Button can be changed to indicate the call state (Idle, Ringing, Call In Progress).

The panel has two modes of operation. It can be configured to operate as part of an IP telephony system, in this mode it registers as part of the telephone system and is given a directory number. The Call Button of the can be configured to call a specific extension number when pressed. Telephony integration has the advantage of allowing the telephone system to handle the call. Features such as Hunt Groups, Forward No Answer and Time Based Routing can be used to ensure the call is handled.

If telephony integration is not required, the panel can be configured with a call list of PC's running the CallPoint application. The PC's microphone and speakers or USB headset is then used to comunicate with the panel.

Features:

• Native IP Door Entry Panel
• IEEE302.3af PoE
• Web Browser Configuration
• Two way audio to pc or IP Telephony handset
• Single, Illuminated 7 colour DDI compliant Call Button
• Supports TCP/IP, IPv4, 10/100 half/full duplex
• G.711 codec (ulaw & Alaw)

Technical Info:

• Connectivity
  1 No. 10/100 Base TX Ethernet RJ45
• Status Indicators
  System / Power LED
  Ethernet Activity LED
• Environment
  Case dimensions 130mm(W) x 215mm(H) x35mm(D)
• Power
  Power over Ethernet Power 802.3af