LevelOne GSW-2476 24 GE + 4 GE Combo SFP Web Smart Switch

NB: Images are indicative only

Benefits

• 24 auto-MDI/MDI-X 10/100/1000Base-T ports
• 4 ports shared with 4 SFP transceiver slots
• Non-blocking switching architecture
• Up to 8 LACP or static 8-port trunks
• Layer 2/3/4 CoS support through four priority queues
• Full support for VLANs with GVRP
• IGMP multicast filtering and snooping
• Support for jumbo frames up to 9KB
• Manageable via Web

24Gigabit Port + 4 SFP Web Smart Switch

The LevelOne GSW-2476 is an intelligent Layer 2 Web Smart Switch with 24 10/100/1000 BASE-T ports with 4 shared SFP transceiver slots.

The switch contains 24 RJ-45 ports that operate at 10 Mbps or 100 Mbps, half or full duplex, or at 1000 Mbps, full duplex. All ports on the switch support automatic MDI/MDI-X operation and auto-negotiation, so the optimum transmission mode and data rate can be selected automatically.

Collapsed Backbone

The GSW-2476 is an excellent choice for mixed Ethernet, Fast Ethernet, and Gigabit Ethernet installations where significant growth is expected in the near future. In a basic stand-alone configuration, it can provide direct full-duplex connections for up to 24 workstations or servers. The server is easily expandable by adding direct full duplex connections to workstations or servers. Further expansion is possible by connecting hubs or switches.

Remote Connections with Fiber Cable

Fiber optic technology allows for longer cabling than any other media type. A 1000BASE-SX (MMF) link can connect to a site up to 550 meters away, a 1000BASE-LX (SMF) link up to 5 km, and a 1000BASE-ZX link up to 100 km. This allows a switch stack to serve as a collapsed backbone, providing direct connectivity for a widespread LAN.

Switch Architecture

The switch employs a wire-speed, non-blocking switching fabric. This permits simultaneous wire-speed transport of multiple packets at low latency on all ports. The switch also features full-duplex capability on all ports, which effectively doubles the bandwidth of each connection.

The switch uses store-and-forward switching to ensure maximum data integrity. With store-and-forward switching, the entire packet must be received into a buffer and checked for validity before being forwarded. This prevents errors from being propagated throughout the network.

Network Management Options

The switch contains a comprehensive array of LEDs for "at-a-glance" monitoring of network and port status. They also include a management agent that allows you to configure or monitor the switch using its embedded management software.