Blown Fibre System

• «
• <
• 1
• 2
• >
• »

• Prysmian Sirocco Accessories

  Accessories for the Prysmian Sirocco Blown Fibre System

• Prysmian Sirocco Blown Fibre Gas Seal Unit

  The Blown Fibre Gas Seal Unit (BFGSU) is typically used in business premises or entry to apartment blocks. This is a wall mounted unit that is positioned internally at the cable entry point. Incoming external blown tube cables are connected t...

• Prysmian Sirocco Blown Fibre Manifold

  The Blown Fibre Manifold can be used on a variety of Prysmian rack mounted products including the SRS3000 sub-rack system and the PSP splice and patch shelf. The manifold provides the ability to enter onto a shelf with up to six blown fibre t...

• Prysmian Sirocco Blown Fibre Tube Patching Panel

  The Sirocco Blown Fibre Tube patching Panel is compatible with 19 and ETSI rack practice and may be either vertically or horizontally mounted within the rack framework. The unit provides the patching capacity for up to 24 x 5mm diameter blown...

• Prysmian Sirocco Blown Fibre Units (EPFU)

  Optical fibre units EPFU (Enhanced Performance Fibre Units) specifically engineered for Blown Fibre applications. The fibres are contained within a soft inner acrylate layer which cushions the fibres, an outer harder layer which protects the ...

• Prysmian Sirocco Blown Tube Patch Shelf

  The 19 inch Blown Tube Patch Shelf provides a solution for connecting up to 48 blown fibre tubes of 5mm in diameter. The shelf is 3U in height and can be mounted into a 19'' rack or street-side cabinet. The connectors inside the shelf are gas...

• Prysmian Sirocco Customer Lead In Unit

  The Customer Lead In unit (CLI) is designed for use in residential and small business premises to manage the entry of cables into buildings. The unit can be used for a single blown tube cable entry or a single optical cable entry up to a diam...

• Prysmian Sirocco Customer Lead In Unit - Large

  The Customer Lead In - Large enables external cable to be passed through the building fabric from an outside wall and is typically used in business premises.

• Prysmian Sirocco DB1 Connection Kit

  The DB1 Connection Kit is used to connect two DB1 Blown Tube cables together. The cables are connected using a standard 5-5mm tube connector. A length of protective conduit is then used to protect the joint and the conduit is sealed to the ca...

• Prysmian Sirocco Direct Install Cable (Duct)

  Assemblies of PE tubes, each with low friction performance suitable for fibre blowing. The tube bundle is surrounded by a layer of moisture-barrier aluminium tape (shown green for clarity) and a flexible sheath of black PE. These products ...

• «
• <
• 1
• 2
• >
• »