Installation Accessories

• «
• <
• 1
• 2
• 3
• >
• »

• 3M Hot Melt Connectors and Accessories

  The 3M Hot Melt termination system is renowned worldwide for its consistency, ease of use and high performance. A wide range of connectors are available each pre loaded with adhesive which is activated when inserted into the specifcially desi...

• AMP Corelink Mechanical Splice

  Re-usable mechanical splices for the Corelink system...

• AMP Splice Enclosure FOSC 400

  The basic units include a ribbed thermoplastic dome, a base complete with one splice organiser tray and cover, a strength member fixation bracket and a tray wedge where applicable. They also come with a mechanical clamp and 'O' ring and a kit...

• Excel Blanking Plugs

  Blanking plugs can be used in part loaded panels to ensure a tidy and professional installation....

• Excel Cable Glands with Strain Relief

  Compression glands are used to provide strain relief for cables as they enter patch panels and wall boxes. The glands are resistant to both benzene and oil. The gland is supplied with a lock nut as standard. Cable diameters from 2.6mm to 25mm...

• Excel Cleaning Wipes

  Pre-saturated Cleaning Wipes IPA - Non abrasive lint free wipes are used to clean fibre and connectors prior to installation, pre-saturated with ISO propyl alcohol in order to eliminate problems with the transportation and use of solvents on ...

• Excel Cold Cure Adhesive and Activator

  Excel Cold Cure Adhesive and Activator pack can be used to terminate approximately 200 ST or SC connectors

• Excel Curing Oven

  Industry standard oven for the curing of epoxy used in fibre optic connector terminations.

• Excel Disposal Bins

  Disposal Bins should be used to store fibre ends after cleaving and general cable preparation. With sealable lid....

• Excel Epoxy Syringe and Needle

  Hand held needle and 3cc syringe sets, used to load connectors with epoxy prior to termination....

• «
• <
• 1
• 2
• 3
• >
• »